Description:
The additive is a solid colloidal lubricant suspension based on Molybdenum Disulfide (MoS2) in mineral oil. The product forms a very resistant lubricating film on all friction or sliding surfaces. Thus, friction is reduced, smooth running of the engine and fuel economy are ensured. Successfully tested for turbochargers and catalytic converters.
Properties:
- can be mixed with all commercial motor oils
- it is stable to high permanent, thermal and dynamic stresses
- does not settle, can be used with the usual filtration systems
- reduces friction and wear during break-in and operation
- ensures good behavior in case of insufficient lubrication
- reduces oil and fuel consumption
- increases silent operation, reliability and economy of engines
Technical specifications:
Base: MOS2 suspension (LM 41 MoS 2 suspension)
Color: light black
MoS2 specifications: corresponds to MIL-M-7866 B, DEF 2304, CS 2819
MoS2 particle size: most <0.3 μm
Solids content: approx. 3%
Density at 20°C: 0.89-0.90 g/ml DIN 51757
Viscosity at 20°C: ~300 mPas DIN 51398
Flash point: 200 °C DIN ISO 2592
Pour point: -20 °C DIN ISO 3016
Aplication domain:
It is added to engine oils, compressors, pumps and especially car engines (gasoline and diesel). Miscible with all commercial motor oils.
Way of ussage:
Add 5% (50 ml per liter of oil) MoS 2 oil additive to the engine oil; on motorcycles with a wet clutch, only 2% (20 ml per liter of oil) is added. Can be added to engine oil at any time. The maximum dosage for motorcycles with a wet clutch is 2%!
Packaging available
Oil additive with MoS 2 125 ml Art. no. 8378
200 ml Art. no. 1012
300 ml Art. no. 2182
500 ml Art. no. 1013
5 L Art. no. 3710
205 L Art. no. 3749