The "Viscoplus" oil additive is a modern, mono-functional, high-quality additive for viscosity stabilization. The oil additive provides special protection against mechanical and at the same time permanent shearing of the oil subjected to extreme operating conditions and is effective against thinning of the oil due to frequent cold starts.
Properties:
- It is based on a mono-functional additive, polymer for improving the viscosity index (IV) developed according to the most modern additive technology. This additive improves the influence of temperature on engine oil viscosity by reducing the viscosity with increasing temperature. It does not act as an additive to reduce pour point or to improve fluidity.
- It is fully compatible with all types of mineral and synthetic engine oil, gasoline and diesel.
- Viscosity index (IV) improvement technology meets all current requirements regarding the lubricating capacity of multi-functional oils.
- It only raises the viscosity value in cold engines and therefore maintains the favorable lubrication properties at low temperature starts of low viscosity multi-functional oils. In extreme operating conditions, eg: High temperatures and high shear (high engine speeds), the "Viscoplus" oil additive provides the necessary lubrication as a high viscosity oil.
- Stabilizes and corrects engine oil viscosity losses caused by: the shear force between the piston and the cylinder wall, maintains the lubricating properties of engine oils between oil changes;
- Increasing the viscosity of engine oil at high temperatures by approximately one SAE class provides better lubricity – engine wear is reduced and sealing of moving engine components is improved.
Physical characteristics:
Color: light brown
Density at 20 0C: 0.88 g/cm3
Viscosity at 20 0C: approx. 8,000 mPas
Flash point: 236 0C
Pour point: - 5 0C
Areas of use:
For all petrol and diesel engines of new and used cars.
Way of ussage:
The content of the 1 L can is sufficient for 10 L to 20 L of engine oil. After mixing, let the engine idle to warm up. The product can be added at any time.
Packaging available
Additive for stabilizing oil viscosity "Viscoplus" 300ml Art. no. 2672
1L Art. no. 2697